Re: ** Turn signal Question **

Posted by kandrtech on Dec 10, 2013; 11:50am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Turn-signal-Question-tp4047371p4047402.html

I'd bet that your new lights are single filament bulbs.  Your stock front bulbs are dual filament - so that you have running lights and turn signals.  If you aren't sure, you could take off the lens and look at the bulb.

Your two wires are likely ground and signal, and it is likely that the black is ground.  While you have that lens off, it should be easy to see which wire goes where inside the light.