Re: CB 750 F DOHC.
Posted by masiste on Jan 21, 2014; 3:26pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/CB-750-F-DOHC-tp4047729p4048319.html
This was the kit by Honda. Came with everything needed for the job, except one O ring needed if completely disassembling the Master Cyl.
According to my shop manual, if I were to remove the side nipple, where the reservoir to Master Cyl hose hooks up to, remove it by removing 2 small phillips screws, then an O ring inside would need replacing.
I did not remove that part, because I did not have that O ring. But tghere was no leak from the mating surfaces (nipple to body pf Master Cyl) so I guess no harm was made.
Let me see if I still have the sketch. Unless that nipple mating surface is leaking, no need to disassemble and disturb this part. Originally I wanted to take it off, so I could repaint the Master Cyl, could not do it. I re touched it , next time I will do a more thorough job.
Look at #21.
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/CB-750-F-DOHC-tp4047729p4048319.html
This was the kit by Honda. Came with everything needed for the job, except one O ring needed if completely disassembling the Master Cyl.
According to my shop manual, if I were to remove the side nipple, where the reservoir to Master Cyl hose hooks up to, remove it by removing 2 small phillips screws, then an O ring inside would need replacing.
I did not remove that part, because I did not have that O ring. But tghere was no leak from the mating surfaces (nipple to body pf Master Cyl) so I guess no harm was made.
Let me see if I still have the sketch. Unless that nipple mating surface is leaking, no need to disassemble and disturb this part. Originally I wanted to take it off, so I could repaint the Master Cyl, could not do it. I re touched it , next time I will do a more thorough job.
Look at #21.
750DOHC
| Free forum by Nabble | Disable Popup Ads | Edit this page |