Re: Starting Trouble

Posted by Ericcb750 on Feb 13, 2014; 10:59am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Starting-Trouble-tp4048695p4048773.html

Alright that makes sense. When I put the head back on I put new pucks underneath the cam towers and gave a tiny bit of Silicone gasket sealer on the bottom side of the pucks (open to air) but I made sure there was none of the sealer on the top of the pucks. I appreciate your help on this and i'll keep you posted as to whats going on. I did not know that about the Cam so thanks for letting me know. I read on the SOHC 4 fourm about the Advancer being 180 out but I didn't remove that from the engine. I'll try the carbs first and go from there.