Re: I GOT PODS TO WORK!!!!!!!!!!
Posted by shinyribs on Mar 16, 2014; 12:58am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/I-GOT-PODS-TO-WORK-tp4039223p4049312.html
Just throwing this up here for people looking at pods on CV's.
I just received a set of CV's off a buddy's '81 F. These are the pods hes was using on them.
I don't know what brand/seller these pods are from (I need to call my buddy that I got these from),but the carbs are just the stock ones off his '81 CB750 F. The needles are non-adjustable so, as far as we know, they are the stock needles. Jets are 140,68,35. Air screws are 2.5 turns out. Pulls to redline HARD and has no bogs or flat spots while you are riding. It does have a weee lil bit less of the snappy feeling it had before, but I may need to tweak the air screws a touch to get the fine tune on that. Very,very little pop on decel. Pretty much what you'd expect with a fairly open 4-1. Air cut-off valves are still in operation. No foam inside the pods or tape on the outside(obviously), just using them straight out of the box. Literaly, just pods and a re-jet.
I'll have to really ride the bike and rack up some miles before I will say with confidence that "pods are working on my CV's'', but as it stand now (after 20 minutes of flogging it in the mountains) well, pods are working on my CV's
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/I-GOT-PODS-TO-WORK-tp4039223p4049312.html
Just throwing this up here for people looking at pods on CV's.
I just received a set of CV's off a buddy's '81 F. These are the pods hes was using on them.
I don't know what brand/seller these pods are from (I need to call my buddy that I got these from),but the carbs are just the stock ones off his '81 CB750 F. The needles are non-adjustable so, as far as we know, they are the stock needles. Jets are 140,68,35. Air screws are 2.5 turns out. Pulls to redline HARD and has no bogs or flat spots while you are riding. It does have a weee lil bit less of the snappy feeling it had before, but I may need to tweak the air screws a touch to get the fine tune on that. Very,very little pop on decel. Pretty much what you'd expect with a fairly open 4-1. Air cut-off valves are still in operation. No foam inside the pods or tape on the outside(obviously), just using them straight out of the box. Literaly, just pods and a re-jet.
I'll have to really ride the bike and rack up some miles before I will say with confidence that "pods are working on my CV's'', but as it stand now (after 20 minutes of flogging it in the mountains) well, pods are working on my CV's
| Free forum by Nabble | Disable Popup Ads | Edit this page |