Re: Toolbabes Trike

Posted by shinyribs on Mar 22, 2014; 12:28am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Toolbabes-Trike-tp4049434p4049457.html

No,I meant that tapered spindle. Does is disassemble from the rest of the rearend? I'm wondering if I can chuck it in the lathe or not.

Of course you are familiar with how a SOHC hub mounts. No tapered spindle,just crush spacers for the bearing on a straight axle. What if we turned the taper on that spindle to a common size )largest available for the amount of material that i spresent) and installed the CB hub that way: Bearings pressed in to the hub, bearings spacers that pinch the inner race from turning? When you tighten the axle nut on the servicar spindle it would lock all the inner races to the spindle,but obviously, allowing the hub to turn freely,just like on a CB's stock front axle.

Clear as mud?