Re: Toolbabes Trike
Posted by
shinyribs on
Mar 22, 2014; 11:47pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Toolbabes-Trike-tp4049434p4049479.html
Rough sketch nowhere near to proportion. The blue areas will be the made pieces.
This is the one we were talking about with the tapered adapter being welded to the CB hub.

Shoot me some hard measurements and I'll be able to get a better idea of how much space is actually available.
-axle O.D.
-distance from axle housing to start of taper
-length of taper
-distance from end of taper to start of threads
-length of threads
-I.D. of axle housing ends (where the seal would fit)
-^^and how deep that bulge goes to see if we can hide the seal on the inside of the axle plate.
I'll measure the width and I.D. of a front hub here and see how it will all fit together.
I'm seeing two bulges in the axle tube. I'm hoping one bulge is an area for the seal and the bearing goes in the innermost bulge. Like this vvv Is that right?

I know the seal originally sat in the brake plate and protruded outward of the axle tubes,but I'm hoping there is an empty void in that outermost bulge to hide the seal in.