Login  Register

Re: building an '81 cb750c bobber

Posted by bobbabouskie on Apr 14, 2014; 2:38am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/building-an-81-cb750c-bobber-tp4048848p4050136.html

It fit pretty close actually, the frame is maybe a half inch too wide I'd say, we just used five washers we had lying around to get it perfect for lining up with the centerline and inverted the sprocket on the rim to line up with the front sprocket. 

Sent from my iPhone

On Apr 13, 2014, at 1:56 PM, "shinyribs [via Honda CB750'S]" <[hidden email]> wrote:

When you put the F2 swingarm in to this frame, at the pivot point, how well did that fit up? Is the mounting width at the pivot the same on both arms?
A free people ought not only be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government.~George Washington






If you reply to this email, your message will be added to the discussion below:
http://honda-cb750-s.456789.n3.nabble.com/building-an-81-cb750c-bobber-tp4048848p4050116.html
To unsubscribe from building an '81 cb750c bobber, click here.
NAML