Re: CB 750 F DOHC.

Posted by masiste on May 26, 2014; 7:33am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/CB-750-F-DOHC-tp4047729p4051375.html

      So after working on jetting my carbs, found out my stator was playing tricks on me.

      After doing the multimeter test looking for continuity between yellow terminals, the stator was declared dead.

      Got one from "Rick's" Electronics. Item seemed great, except for the fact it did not have the rubber gromet attached to cable, gromet that goes on lower side of alternator housing in motor.

      So I had to get the stator connector disassembled so I could slide in place the rubber gromet from old stator cable, and then re assemnle it.

      Purchased a tool to remove female terminals from plug. With it, the locking tab on metal terminal  coild be flattened so terminal could get backed up and out from connector.

     Once that done, reassemble stator. Also changed brushes. Brushes looked worn out. Good. i bought new ones , still available at dealer.  Should last good.

  Here is the tool.



  Connector with female terminals.




  Terminal removed. See tab on underside ? That is what needs get flattened with tool so terminal can slide off of connector. Once ready to re install, tab has to be straightened out so it will re lock.



  Changed brushes. See comparison between new and old brushes.




 


  Finished Product :