Re: Lower End Rebuild

Posted by Re-run on
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Lower-End-Rebuild-tp4053271p4053292.html

You WILL need the cam chain guides and stuff. Those rubber bits are long since dried up. A chain would be good too. All seals and gaskets including valve guides and seals should be replaced. I would do the springs too. Studs should be changed too. They do not like being torqued all these years later. It is best to do it right now instead of having to do it again in a couple years.

I wouldn't do used parts unless you have to. Things such as heads are unavoidable though.