Re: jetting for unleaded gas

Posted by theo305 on May 16, 2015; 3:08pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/jetting-for-unleaded-gas-tp4055213p4056547.html

Just find time today and pull my carbs out for cleaning and guess what?
Tools was right the jets where clocked also find some rust from the gas tank.
After cleaning everything I changed the main jets from 102 to 100 because spark readings
looked like rich condition. I put back the carbs but they were leaking  gas from that T pipe
where the gas hose connected. So pull out again  and replaced the o rings.Also reset the choke
butterflies that were not closing properly
Give it a start  and the engine started immediately!
It's like i am driving a new bike good throttle response and lots of power!
Now I have to sync the carbs for perfect tuning.
I want to thanks tools for all support giving us every time always replying first to help us with
the deep knowledge he has for cbs