Re: Installing CM400 18" Comstar Wheel on Front

Posted by Waco750F on Jan 30, 2016; 2:22am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Installing-CM400-18-Comstar-Wheel-on-Front-tp4059483p4059494.html

Got the CM400 wheel coming from ebay with the speedometer gear that goes with that 18" wheel. The local Honda parts counter gave me the part numbers for 750 and 400 bearings; same part number but different suffixes (6302U and 6302Z). I'm thinking if the hubs are the same width, the 400 wheel can be assembled using 750 bearings and stackup, enabling me to retain twin disks rather than single disk.

It sounds do-able. Any thoughts or experience doing this wheel swap?