Re: HELP!!!!! 82 CB750 top end rebuild

Posted by UselessGoose on Mar 30, 2016; 1:41am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/HELP-82-CB750-top-end-rebuild-tp4059920p4059931.html

I just checked the gap with the rings.  I didn't use a feeler gauge.  But everything seemed to be smooth no troubles on piston assembly.  I figured the block would move from the friction caused by the pistons.  It's more that when everything is bolted down I can't turn the drive shaft but as soon as I start taking things apart the whole block moves which makes me think it is not the chain but something causing friction amongst the pistons themselves.

I am in the middle of taking the cylinder block off now.  I took just the cylinder head off earlier.  There seems to be a lot more friction than the first time I did it!