Login  Register

Re: How to change a clutch-SOHC

Posted by senyah750 on Oct 21, 2016; 6:39pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-tp4040391p4061460.html

Great! Thanks, Tools..!

Yes, after i adjust the throwout bearing (the clutch cable is completely slacked off) and i go to tighten up the cable at the clutch end, i can see the clutch cable arm moving in from the cable tightening. Will the clutch arm moving in apply too much pressure to the discs or is this supposed to happen?

I just don't want to over tighten anything at the clutch end and burn it up!

Again, sorry for the n00b question. Just want to make sure its right since the bike is running great otherwise!

Thanks!