Re: 1979 CB750k Wire Routing

Posted by bobwilson on
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/1979-CB750k-Wire-Routing-tp4059754p4061610.html

Thanks.  I just had a look through my photos and to my surprise, not one good photo of it. I'll get a good pic of it later today for you.  It's actually a 1/8" thick plate welded to the frame with a couple of threaded M6 holes.  If you use the same method cut the plate to size, bolt it to a temporary block the size of the Rect (I used wood) and weld it in place to an angle that doesn't interfere with the swing arm travel.

Bob.

---

From: Jono750 [via Honda CB750'S] <ml-node+[hidden email]>
Sent: November 23, 2016 7:02 AM
To: bobwilson
Subject: Re: 1979 CB750k Wire Routing

 

Hi awesome build! I'm in the middle of a project myself.. any chance you would have any images of the reg/rec mounted by the swing arm? Thanks!

---

If you reply to this email, your message will be added to the discussion below:

http://honda-cb750-s.456789.n3.nabble.com/1979-CB750k-Wire-Routing-tp4059754p4061608.html

Honda CB750'S - 1979 CB750k Wire Routing honda-cb750-s.456789.n3.nabble.com 1979 CB750k Wire Routing. Hi, I'm rebuilding a CB750K (example below, 1980 I think, maybe an F) and just getting ready to sort out the new wire routing, something a little cleaner than the original to...

To unsubscribe from 1979 CB750k Wire Routing, click here.
NAML