Re: Valve clearance questions dohc
Posted by Chip on May 28, 2017; 1:45am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Valve-clearance-questions-dohc-tp4038374p4062316.html
I have a 81 cb900c. Rebuilt the engine and cylinder head.i have a question about the calendar head.i bagged and labeled all the valves and parts so to put them back in the same hole the same out of. All I did was hand lap the valves. When I whet to reassemble after installing the cans
Some of the valve shims were way off, I had to surface grind as much as 30 thousand off them to get the 5 thou clearance. What could have possibly happened