Re: Oil leak

Posted by CB750Winger on Dec 23, 2009; 3:11pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Oil-leak-tp457519p457528.html

  Yeah, all that re-run said above. Don't skimp on gaskets and seals, try to get Honda or you'll be doing it all again soon. Do it right the first time. Also check out the cylinder walls for scoring and carbon ridge at the top. The ridge is normal but if you end up boring or at least honing the cylinder walls, you'll need a good set of rings or they will never seat right and will burn oil. I'm probably going to fast here but if I were going that far on it, I would do it all, just my opinion.