80 CB750K Not Charging with new parts!

Posted by BullMagnum on May 14, 2008; 3:15pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/80-CB750K-Not-Charging-with-new-parts-tp457780.html

Newbie here! Any help appreciated.
New Battery, New Stator, New Reg/Rec, new Rotor.
Checked all parts with meter, they are in spec.
Cleaned all frame grounds, still battery does not charge!
Starts at 13.13 V, turn on kill switch still 13.13 V, turn on ignition goes to 11.8 V???
Start bike stays @ 11.8 V. Turn igniton switch off goes to 12.5 V.
Each start gets lower and lower Volts until bike will not run.
Could it be the wiring harness?
No corrosion on any connections.