Re: Help Please with carb linkage problem
Posted by CB750Winger on Oct 23, 2008; 12:21pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Help-Please-with-carb-linkage-problem-tp458579p458580.html
Hey Sam, take the air box off, unhook throttle cables and intake clamps and pull the carbs off. There are 8 screws holding the carbs to the linkage bracket and you can pull each carb out of that. There are two fuel tubes holding 1 to 2, and 3 to 4 carbs. You can take off the synch nuts off the carb tops so you don't force the carb slide shafts. The linkage will stay with the bracket. Now soak it good with WD40 or something and see if you can work it loose. If you unscrew the carb tops, the slides and needle jets should pull right out. This is all providing the 750F is set up like the 750K Paul