Re: Help Please with carb linkage problem

Posted by CB750Winger on Oct 23, 2008; 2:12pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Help-Please-with-carb-linkage-problem-tp458579p458585.html

  No problem, I did a complete overhaul on my carbs not long ago. I got the kits from oldbikebarn.com for around $100. Comes with all the gaskets, air mixture screws, all jets. Make sure all your high and low jets are clear. If you have a wire brush, cut a strand off and use to run through the jets, or cut a piece off a fine broom. The holes are very small in the slow jets. I can walk you through assembly and set up. You'll need to adjust air mixture and sync the carbs when done.