Re: Float Bowl Adjustment

Posted by cbRider on Apr 21, 2009; 2:57pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Float-Bowl-Adjustment-tp459762p459764.html

tim
this sounds like a lean condition in all or more than likely your #3 carb. Do set up the float as brcree described, that's the right way to do it. You could also be sucking air at the intake boot on #3 carb.
Make sure you have nice, tight connections. Check that by spraying starting fluid onto the boots while the engine is idling. Listen for change in RPM while spraying. I would also recommend using an in-line gas filter.
Good luck.
Karl