Re: Brake Master Cylinder problems. Need Help

Posted by vern401 on Jun 06, 2010; 10:27am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Brake-Master-Cylinder-problems-Need-Help-tp847008p873911.html

I'll look and see what I have. Does your resivour have two or four screws holding the top on? From your Pic I dont think I have an exact match though. Did you have any luck using a punch to push it out. First I'd soak it in PB blaster or some other spray that loosens rusty bolts and screws, then try to push it out with a punch and tapping with a hammer. If you have CLR soak it in that for a while first it will help remove the rust. I have used it to remove rust in gas tanks. Try getting it out while I look for a replacement just in case your is toast, I may not have a good one laying around.