using Gattor fork seals

[Piute]

 I seen these on Vintage "Fork Seal Dust Boot (Set/2) - Fits: Honda CB750 35mm. fork tubes.

Fits: Honda CB750F (1977-78) Supersport
Part #: 27-1081
  and need to know can I use these so I wont have to put a clamp on the outside at bottom were seal goes ? It is the fit for a "77" F2 but can't find any write ups on it any-weres.
 

 Can you tell how the seal has a lip to hold onto gattor. AND does it only fit stock gattors then what year ?
  The new gattors I got off flea-bay are new for a "76" though. Any input would help will have gattors in couple days but don't wont to change seals twice when they don't even need them now.But will put in new for the peace of mind,and the legs are off to put gattors on,
                             
          Thanks guys,opp's and gal



                                                                                        Stock type seals

[sgtslag]

Not sure I understand your question, but the upper photo shows dust caps, not fork seals, which is what the second photo shows.  You actually need both.

If I understand you, you plan to add gators over the tops of the seals?  I added them to my '79, they're supposed to double the life of the oil seals.  They don't look bad, either, IMO.

I plan on adding something to my '93, also, to help its seals last as long as possible.  I don't care to replace seals more often than is absolutely necessary.  I also like the look of gators.  YMMV.    Cheers!

[TOOLS1]

What Sarg said. Also the stock type Honda gators need to attach to the fork ears at the top. However Cycle-X sells a set that fit on the fork tube, and do not attach to the ears.
TOOLS

[Piute]

         Not sure I understand your question, but the upper photo shows dust caps, not fork seals,
         which is what the second photo shows.  You actually need both.
 
 Tanks Sgt.
    O.K. thought these replaced /were the seal but are just boots to use with the gators N seals
        COOL  .
 
 Hey TOOLS ,
  plan to make these work under(?)the ears I have ,Why there still chrome and not painted yet
Something I have spinning around my empty mind(wire some glass?)

[shinyribs]

They're for a '76? Well,just send them to me ,then you won't even have to worry about it

[Piute]

 
   Got to admit was thinking of you because of the year when I ordered them,
 NA you wont the ones with chrome etched rings mo yo style
 
    Tour-pac / trunk looks great now flt. blk. and needing more to it  and I need more paint

[shinyribs]

You got it on?I wanna see that!  Oh yeah,I may have to hook up with you before long to get my side covers fixed.Left side broke tonight while riding.I guess they get brittle cruising the highways at 33 degrees.I dunno,might go aluminum if they break this easily.Havent decided yet

[Piute]

  just old and brittle,send them and I'll coat them with some fresh glass n res..Just got a fresh box of goods
 going to try raised molding of some tribal flames.Ya see this bike has to get me some $$ in advertisement, Like Judose in stud fees.everything needs to pay it's keep.
                                  Tribal drawing  ?
       

  Will use Paul's camera

[shinyribs]

Stud fees???Where do i sign up?!

[Piute]