'77 CB750A- Parting out a matic cheap! *some parts fit F&K*

[shinyribs]

I want this stuff gone so I'm pricing it to move. What doesn't move in a reasonable amount of time will be ''recycled''.Please,don't make me hafta.

The bike has 16,00 original miles on it.Some parts may fit other models.

ALL PRICES ARE PARTS ONLY*SHIPPING IS EXTRA*

Coils-Never tested-no warranty implied-$5



Complete engine mounting bolts/brackets-no damaged threads-$10



Starter-tested and works-will fit F&K-$10


Air box-no cracks or missing parts-has one frozen bolt in a tab still,visible in pic-$10



Complete triple tree assy-$10

Rectifier-not tested-no warranty implied-$5


Front and rear foot pegs-$5 per pair or all four for $7



Rear inner fender-$5 each


Front rotor covers-$5 each or both for $7



Rods-good!-will fit any SOHC 750-$15


Head with 16k miles on it-one cracked intake spigot-$15



Jugs-#1 is bad-may bore out,may need a sleeve-$10







*CASE STUDS REMOVED FOR SHIPPING WILL COST EXTRA $50* seriously,you know it's a pita :)

-I will cut the studs off within 3'' of the case for FREE-your option-

Engine cases with all hardware-no damage to cases or any threads-Completely healthy-$30




*EDIT*As of 5-15-2013 this is what's left.

[shinyribs]

IF IT IS NOT LISTED IN THE AD ,THEN I DONT HAVE IT. Thanks-Eric.

[TOOLS1]

Shifter, chain guard, sprocket cover, and maybe the forks. I did not think they would be in that good of shape.
TOOLS

[shinyribs]

I was surprised,too. You want the shifter lever,not the cover,right?

And just to help me keep track(its easier for me to pull up on my phone):

kickstand                      $  5
wire harness                     0
shifter lever                      5
swingarm with blocks        15
chain guard                      5
sprocket cover                  5
chrome doo hickey             5
--------------------------------
                                  $ 40      <-sound OK to you?
and the ones you're not sure about yet:

forks  $20
jugs?   10

[Piute]

shinyribs wrote

IF IT IS NOT LISTED IN THE AD ,THEN I DONT HAVE IT. Thanks-Eric.

         You have it I seen it but maybe riding it


                                                   Piute list

             Covers; starter,breather,Thinking valve cover also(P.M. being sent)
                                                AND tensioner thingy
                                                                           

[shinyribs]

Cool! Thanks man. I didn't get your PM.So you might need to resend it.


Piute's list

Starter cover                               $5
Valve cover breather cover              5
Cam chain tensioner                       5
Light thingy                                  0
----------------------------------------
                                                $15


And maybe:

Valve cover                                 $15


Thanks bud,just let me know when you decide on the valve cover.

[kandrtech]

I'll take the:

oil filter cover (don't want the bolt)
oil pump
the parts behind the shift cover
sump

Let me know price shipped to 68410.  I assume you have paypal?

[shinyribs]

Tools,I found a set of Triple A floor boards for sale if you're interested.$40+shipping. Not mine,but I can show you where they're at.Just holler

[TOOLS1]

shinyribs wrote

Tools,I found a set of Triple A floor boards for sale if you're interested.$40+shipping. Not mine,but I can show you where they're at.Just holler

Well yea!!!!!!
TOOLS

[shinyribs]

Pm sent

[shinyribs]

kandrtech wrote

I'll take the:

oil filter cover (don't want the bolt)
oil pump
the parts behind the shift cover
sump

Let me know price shipped to 68410.  I assume you have paypal?

Great! Thank you!

oil filter cover                     $5
oil pump                              5
parts behind shifter cover       5
sump(oil pan)                       5
-------------------------------
sub total                           $20
shipping                            $20  <-online qoute from USPS
-------------------------------
Grand Total                       $40

I do accept Paypal. If this total looks good to you I'll PM you with my Paypal info.Thanks-Eric

[Piute]

 
Try again putters

     You still have the shop address on Main
   Don't have the zip # for my new place will by wkend,
   Need to make a lock box for there also,

[kandrtech]

looks good to me.  send me your paypal id, and I'll pay

[Johnnylevi]

hey shiny is that headlight bucket still available? :D

[shinyribs]

kandrtech wrote

looks good to me.  send me your paypal id, and I'll pay

Great! PM sent.  Thank you

[shinyribs]

Johnnylevi wrote

hey shiny is that headlight bucket still available? :D

It sure is!

[Johnnylevi]

PM sent!

[kandrtech]

By the way - I want the transmission parts, too - but will have to wait a month.  I'll check back in about a month . . . .

[shinyribs]

Not a problem. I don't know how to remove the torque converter from it's shaft. It may save you some shipping if I can separate them. If you can let me know how I'll be glad to get that off there for you.

I have your other parts boxed up and they will got out Monday.   Thanks again!



Tools,for you I have

chrome doo hickey
chain guard
sprocket cover
wiring
s-arm
forks
shifter lever
stator cover with stator

Did I forget anything? Just double checking before I seal your box up.


Piute,PM sent about the chrome.Just let me know what you decide bud.

[TOOLS1]

I was going to suggest you remove the tubes from the sliders, or the springs from the tubes to make the box smaller, for shipping. That way it would not cost as much as shipping a long box. Also you forgot the 10 lbs of 20's.
TOOLS
P.S. Could you maybe run a hone, or some sand paper through those cylinders to see how bad they are?