Anyone know where I can find this part?

classic Classic list List threaded Threaded
68 messages Options
1234
Reply | Threaded
Open this post in threaded view
|

Re: Anyone know where I can find this part?

TOOLS1
Administrator
Got them shipped. Tracking# 1308 0950 0000 2791 9189 you should have them Fri. Will be expecting pictures of the install. The shipping was $19.10
I wanted to tell you to grease the pivot shafts when you install them, and if you need to shorten the linkage rods, you can safely cut a 1/2 inch from each end before you would need to thread them deeper. The thread is M8X1.25. Also the studs that the chrome clevis's for the foot pegs are replaceable if they ever get damaged. They are screwed in, and locktited.
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."

1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
Reply | Threaded
Open this post in threaded view
|

Re: Anyone know where I can find this part?

AAchops

I got em. I'm in the middle of moving so I'll get the rest of that money over today or tomorrow whenever I get a chance. What's the basic process on gettin these on?

On Jul 15, 2015 1:34 PM, "TOOLS1 [via Honda CB750'S]" <[hidden email]> wrote:
Got them shipped. Tracking# 1308 0950 0000 2791 9189 you should have them Fri. Will be expecting pictures of the install. The shipping was $19.10
I wanted to tell you to grease the pivot shafts when you install them, and if you need to shorten the linkage rods, you can safely cut a 1/2 inch from each end before you would need to thread them deeper. The thread is M8X1.25. Also the studs that the chrome clevis's for the foot pegs are replaceable if they ever get damaged. They are screwed in, and locktited.
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run

1976 CB 750-A X 2
1977 CB 750-A X 2
1977 CB 750-K X 2
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)



If you reply to this email, your message will be added to the discussion below:
http://honda-cb750-s.456789.n3.nabble.com/Anyone-know-where-I-can-find-this-part-tp4057353p4057685.html
To unsubscribe from Anyone know where I can find this part?, click here.
NAML
Reply | Threaded
Open this post in threaded view
|

Re: Anyone know where I can find this part?

TOOLS1
Administrator
Cool!
Start by installing the bananas onto the engine. The nut for the top bolt is captured by the engine casing, so just slide it into position and tighten the bolt on. The lock washer will go on the outside/bolt head, not the nut (just as I placed them on the parts.) The all thread is for the bottom in case your bolt is too short. Then hold the controls up, and find where you want them placed. Then mark the bananas where you want them, and drill a 10.5mm hole for the bolts on the control shaft to go through them. I would suggest bolting/clamping the bananas together when drilling the holes, so that they will be in the same location on both. Then bolt them back on, bolt the shafts to the bananas, and put the foot controls on. Then find the best place for the tabs for the linkage rods to be placed (think this through carefully, and try several different locations before deciding) then mark where they will go with a sharpie. Take them to some with a welder, and have them welded on. Then just put them back on, and install the linkages. If you need to cut the rods, you can cut a 1/2 inch off each end before you would need to re thread. The thread is an M8X1.25. However I think I have them the right length. Also when you do the final assembly, be sure to grease the shafts where the foot controls pivot.
If you encounter any problems, just let me know and I will try to help.
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."

1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
Reply | Threaded
Open this post in threaded view
|

Re: Anyone know where I can find this part?

AAchops
awesome, going to get working on this tonight. thanks!
Reply | Threaded
Open this post in threaded view
|

Re: Anyone know where I can find this part?

AAchops
In reply to this post by TOOLS1
getting parts welded tonight. Will send pictures of everything once they are fully on!
Reply | Threaded
Open this post in threaded view
|

Re: Anyone know where I can find this part?

TOOLS1
Administrator
COOL! Looking forward to seeing them.
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."

1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
Reply | Threaded
Open this post in threaded view
|

Re: Anyone know where I can find this part?

AAchops
FINISHED PRODUCT! so excited i can finally get riding again. Thanks a million Tools!








big looks, lookin good!




Reply | Threaded
Open this post in threaded view
|

Re: Anyone know where I can find this part?

TOOLS1
Administrator
Looks good!
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."

1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
1234