Carbs...750F rebuild kit

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

Carbs...750F rebuild kit

Tate
I am going to rebuild my carbs. I have found the rebuild kit for a CB750K but mine is a CB750F is that the same rebuild kit for mine? Mine is a 1975 CB750F Super Sport. Thanks!
Reply | Threaded
Open this post in threaded view
|

Re: Carbs...750F rebuild kit

TOOLS1
Administrator
When I rebuild them, the only parts I replace are the float bowel gaskets, float needles, and sometimes the rubber O-rings on the fuel tubes between the carbs. And since some of that does not come in a kit, and you get a lot of parts, you don't need. It is cheaper to just buy what, you need. And yes the kits, for the K will work. One last word of advice. Make sure the float bowel gasket is a formed one. The non formed O-ring ones really SUCK
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."

1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
Reply | Threaded
Open this post in threaded view
|

Re: Carbs...750F rebuild kit

Tate
Thanks! I don't know why I can find the actual one for my F but good to know a K will work.

 

----- Original Message -----

From: TOOLS1 [via Honda CB750'S]

Sent: 08/17/12 01:45 PM

To: Tate

Subject: Re: Carbs...750F rebuild kit


When I rebuild them, the only parts I replace are the float bowel gaskets, float needles, and sometimes the rubber O-rings on the fuel tubes between the carbs. And since some of that does not come in a kit, and you get a lot of parts, you don't need. It is cheaper to just buy what, you need. And yes the kits, for the K will work. One last word of advice. Make sure the float bowel gasket is a formed one. The non formed O-ring ones really SUCK
TOOLS

Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
1976 CB 750-A X 2
1977 CB 750-A X 2
1981 CB 750
1995 KZ 1000 P-14
1981 KZ 750 LTD X 2
1973 CB 350
1979 CM 185 Twinstar
1987 Honda TLR 200
1982 Honda XL 80
2005 Yamaha PW 50
South of Edan (Kansas City MO)



If you reply to this email, your message will be added to the discussion below:
http://honda-cb750-s.456789.n3.nabble.com/Carbs-750F-rebuild-kit-tp4027328p4027329.html
To unsubscribe from Carbs...750F rebuild kit, click here.
NAML

 


Reply | Threaded
Open this post in threaded view
|

Re: Carbs...750F rebuild kit

pat english
In reply to this post by Tate
f and k use the same carbs..just gotta figure out if you have the round top style or the keyhole style...before you take them off and all apart,you might wana just pop the bowls off and get the jets out and squirt some solvent through them then blow them out with some compressed air...thats all a rebuild is anyways..and replacing the bowl gasket...
Reply | Threaded
Open this post in threaded view
|

Re: Carbs...750F rebuild kit

zer213
is that some Unknown Hinson. Saw him live a few times here in Columbia. Awesome show.
Reply | Threaded
Open this post in threaded view
|

Re: Carbs...750F rebuild kit

pat english
hell yeah buddy!!..i havnt seen him live and i missed the last show when he was in la...i was bummed.
Reply | Threaded
Open this post in threaded view
|

Re: Carbs...750F rebuild kit

shinyribs
Administrator
that does suck. I bet you cleaned out a room in your trailer and everything..... I didn't know there was cool music on the left coast