New parts!

[rrgunslinger]

The start of improving some things I was not pleased about.

[rrgunslinger]

Remove tank and carbs...

[rrgunslinger]

Details so one can put it back together  

[rrgunslinger]

Lay things out so not to lose parts.

[rrgunslinger]

Be easy when replacing these.  If you turn the jet holder to tight you will crack the housing (ask me how I know). Hold the holder with a wrench while putting in the Jets.

[rrgunslinger]

Take a close look at this pic.  I have two of these on backwards.  Can you tell what ones?

[Piute]

                                                                   nice
                                                                   

[TOOLS1]

You can repair the main jet casting in the card with some JB Weld, and a spent .45 ACP shell Just drill out the end of the shell casing, smear some JB Weld on the casting, then tap the shell casing down on it.
TOOLS

[rrgunslinger]

Cool

Harvey

On Mar 11, 2012 7:55 PM, "TOOLS1 [via Honda CB750&apos;S]" <[hidden email]> wrote:

You can repair the main jet casting in the card with some JB Weld, and a spent .45 ACP shell Just drill out the end of the shell casing, smear some JB Weld on the casting, then tap the shell casing down on it.
TOOLS

Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
1976 CB 750-A X 2
1977 CB 750-A X 2
1981 CB 750
1995 KZ 1000 P-14
1981 KZ 750 LTD X 2
1974 CB 350 Four
1979 CM 185 Twinstar
1987 Honda TLR 200
197? Yamaha DT 100
1982 Honda XL 80
2005 Yamaha PW 50
South of Edan (Kansas City MO)

---

If you reply to this email, your message will be added to the discussion below:

http://honda-cb750-s.456789.n3.nabble.com/New-parts-tp3817908p3818047.html

To unsubscribe from New parts!, click here.
NAML

[MarkPBG]

NICE! Waiting on 4 boxes of new parts myself! Time to get it going!

[rrgunslinger]

Well, I was done with everything, fired her up and the one of the coils did not work.  I should have known. Well tomorrow is another day.

[shinyribs]

One of the new coils didnt work? Thats a downer.

[rrgunslinger]

Update.  Coil not bad, they are just not made for the stock bracket and it was shorting out.   Now I either have to put the old ones back on or figure out a way to mount the new ones.  
It run alot better with the larger jets in it.