You can download the factory service manual from the manuals section on the homepage here, for free. Several places carry gasket sets for your bike. Cycle-x, vintageCB750, and even e-bay has quite a selection. Vesrah brand is one of the best. For special tool, you will need a special socket, for the clutch hub, a puller, for the rotor, and a tool for the valve shims.
A word of caution though. If this is your first engine rebuild; make sure your Instructor is familiar with this type of engine. I have dealt with auto/motorcycle repair classes, and seen several projects like yours leave the classroom in box's never to run again. I would do a compression check on your engine to determine if it really needs rebuilt, or just new gaskets, and seals.
Good Luck
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."
1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
Locked
