Wiring trick

[shinyribs]

Havent used this one in a long time.Broke it out tonight.If you are running a bundle of wires on a long run ,say along the frame rail of a bike,and dont want a million zipties all over the place,get a stiff piece of wire like a coat hanger or whatever.I like to use filler rods that i have for the TIG.They are super stiff.Just run it along in the wire bundle and then you can bend and form the whole bundle with out having to use all those ties.Works good,just putting it out there.

[TOOLS1]

Very good idea. I am going to have to remember that.
TOOLS

[Piute]

  add another wire to this mess ,I excpect better from you Mc Chrome

[shinyribs]

Piute n Judose wrote

add another wire to this mess ,I excpect better from you Mc Chrome

HAHA Only you would've come up with that!

[Piute]

acually most of these can go in frame ,but have to wait till bike is running great,just in case,was reading up on putting them thru the bars,how to drill the holes n such

[shinyribs]

I was gonna redrill my bars for the wires,but it is a PAIN to feed them thru.I just zip-tied mine along the bottom of the bars.You really cant see it.....i'm lazy

[TOOLS1]

I would rather have a severe beating then have to deal with wires run through the handlebars.
TOOLS

[Piute]

   There are lots of tricks to it just have to no them and have patients ,
 Makes the bike look a whole lot cleaner and easier to keep clean.
"O" to get your wire to the other end and thru the hole use air from compressor no prob.