help please need some rubbers

[Piute]

  They look good /great ,but are sucking air .winter green that spray bottle cleaner ?

[Ray]

http://www.cmsnl.com/honda_model8286/




that gives you a complete parts list OEM number so you can see if one fits another


                                                               Ray
                                                              81 CB750C

[TOOLS1]

No, that's "Simple green." What, you want is "Wintergreen." You can get it at any Pharmacy. Just use 1oz per qt of water. Put in an old pot, and bring to slow simmer. Boil the rubber boots, for 45 minuets. Also put something in the bottom of the pot to keep the rubber boots from touching the bottom. A piece of bent chicken wire works perfect.
And very important!!! Wintergreen is poisons!!
TOOLS

[Piute]

  ..Will do Tools ,boiled them already but not near that long,and thx Ray,i have the 2 #s let try this wintergreen 1st pick up on way home from work thx again Good night..Piute N Judose

[shinyribs]

TOOLS1 wrote

 Just use 1oz per qt of water. Put in an old pot, and bring to slow simmer. Boil the rubber boots, for 45 minuets.

HAHA   "Chef Tools will be appearing on Emeril Live this weekend.     BAM!!!    ...stay tuned for Martha Stewart Living to see shinyribs make coleslaw of of a '76 cb750f......      

[TOOLS1]

For the main course "Spaghetti wiring".
TOOLS

[shinyribs]

Exactly!!

[Piute]

  ..O.K.here is a picture of the part that is cracked,fills to go all the way on it,theres no scatches or dents ,Don't know how it happened or when,ANY ONE know what it's called ? having hard time finding without #s,,Thanks ,...Piute...

[shinyribs]

My buddy that gave me my bike has some other pieces of bikes lying around.I'll see if i can get you one. Going to funeral home in a few hours,he lost his mama this past friday.So probably not gonna talk about bikes tonight but i will see what i can turn up. If we cant find one,mail me yours and i can weld it up for you.Its aluminum,right?   later

[Piute]

..yes it's aluminum,not sure if its pressed in or screwed ,I'mm assuming screwed because of the nut look on is but read elsewhere was pressed,then the year thing being different so I'm not taking out till I get another,My neighbor can wield it (thank you ).waiting on parts so trying to stay mellow,always things to clean up,haven't found the right box to make mold for oil bag side cover.thats 2 days busy.picky as I am, Thanks again Eric ? ?...Mark N Jude 2...l.o.l.

[shinyribs]

Yeah the nuts flats make me think they are threaded,too. I would be half scared to thread one out, to be honest.Aluminum on aluminum tends to gall real bad. Good luck bud.  Later

[Piute]

  ..well thank for the confidence shiny,hey my bro wonts pics of your bomb n pimpala,he just so happen to send this ...Piute...

[shinyribs]

I can send pis if you want.Just let me know.I think i got some better than my cell phone pics somewhere.Is that his Elky? That is niiiiice!!!I love stripe on those cars!

[shinyribs]

Oh,Piute. You called my Olds a bomb.Check this out.When i got this car i was digging thru the ashtray and found the letters for the front of the hood.Some letters were missing but had some extras,too.Check it out.

[TOOLS1]

LOL
TOOLS

[ksharp]

i have an extra set not for your year, dontknow it it makes a diff,or you can always ebay

[Piute]

  ..BOMB ..O.K. he will love that l.o.l. O.K.finally got the green stuff (winter-green),get this boiling,45min. right TOOLS,went all over ,had to order it,.get the rest of carb done now while off AGAIN ,cuzzin said to put some tubes on the ajusting heads(we starting at 2 full turns ?) so just turn useing them, was a pain trying to get a stubby in under there,nice tip ? Where's my 10mm..Piute N Judose...

[Piute]

  ..just got a wench thrown in my carb,all parts together shaft on diaphragm to short,at least my patients are long...piute..

[rusty vango]

excuse me ,but a company called "cb750supply.com" has what you need for $75 i think

[Piute]

  ..Hey Vango Thanks,thats were I ordered it and it don't fit well the shaft is to short " if " the diaphragm is what your referring to,and the boots they don't have ,used a TOOL trick with WinterGreen that did A great Job soffening them up and got widder clamps,...Piute...