$10 PART PILE!!..EVRYTHING $10!!

[pat english]

Any item,$10 bucks plus shipping.EVERYTHING MUST GO!

[shinyribs]

I'll buy the stator and the valvecover.  

You will have my shipping info when your stuff shows up. Just holler back at me and let me know how much i owe you . No rush and thanks for this.

[shinyribs]

Hold on,is that a spigot style 4-1? If it is I'm tempted to get that,too. Very tempted.

[pat english]

right on.what the spigot style?the kind that take clamps?..yeah you will be spending more on the shipping then what im asking for the parts...the big stuff anyways.

[TOOLS1]

Darn! You beat me to the stator cover.
TOOLS

[Piute]

O.K. what's left
   Those 3 lil braket arm looking thingy's(bolts)at top of 1st pic.
   That spring and long rod with shaft and lever
   and that what looks like a brake lever
 These all look pretty rust are they going to brake ?
 If ya think there junk don't need,I save junk find some use for it
 Believe those are all foot control stuff,Was that long rod used for brake (drum)or shifter ?
 Making up a lot of that stuff now as I'm writing this .
  Like to see how other have done/made parts.
                                                                  Give me a total with shipping Mo.65738

                                                                       

[pat english]

nah they wont brake with normal use..theyre pretty thick steel..some of those brackets are for foward controls...i dont want them becuase they are chrome..i hate chrome.

im looking for 69-70 for tube ears in trade..or what ever theyre called..they hold the headlight and they are painted.not chrome.

[shinyribs]

pat english wrote

right on.what the spigot style?the kind that take clamps?..yeah you will be spending more on the shipping then what im asking for the parts...the big stuff anyways.

Yeah,the clamp style. Will the header break down into smaller pieces? Doesnt look like it.

Hey Tools,you beat me to the case guards so

[shinyribs]

Hey Pat. If you can cut that header a few inches after the collector it would be fine for me. I'm not worried about that straight section of pipe,just the header part and the collector. I think it will all fit in the box your tank is coming in.

Tools,do you really need a stator cover? I think the one on HJ is cracked. Too lazy to weld it.

[Piute]

    69-70 Dog Ears Those years are going to be hard to find,Mine were chrome just painted them,
                               

[pat english]

no it doesnt come apart..yeah i can cut it..

the stator cover is chromed and has some rash on it..i would say its only usable..looks like shit though..actually all these parts look like shit...

[pat english]

yeah they kinda are..i had a set that i was holding onto for years and finally just sold them..i bought them for 20 bucks..

[Piute]

  If you gave me your size tubes and if you /anybody has measurement approx center tube to center bolt mount hole ,I'll bet the more common smaller ("CCs engines) Bike's ,I can find and we'll be in business.

                                        FLEA-bay 55 bucks new only 1 side

                                        THINk thats red Gold(RARE)

[pat english]

all cb 750s are 35mm fork tubes correct?...ive tried a set from a cb 500 before and they were too short..i guess its possible that some others might work tho.

[shinyribs]

All of the SOHC's are 35mm. Most all of the DOHC's are 35mm except for a few 37mm's. Not sure exactly which ones are 37mm. I know Slownugly's bike (81 F ? ) have 37mm on it.

[shinyribs]

Hey Pat,do you have the spigots that 4-1 was on,or are you reusing them?

[pat english]

yeah i have them.I was guna save those,but if you need them id sell em for cheap

did you decide if you want that 4 into 1 for sure?

and did you need the stator or just the cover?i was thinking i might need to save the stator in case mine isnt working.Is $10 a fair price for just the cover?

[pat english]

just looked on ebay..those guys are asking alot for some of those covers..the cheapist on was $40 bucks!!

[pat english]

so you want the valve cover,stator cover,4 into 1 and spigots?$40 bucks?(plus shipping)

sure you dont have any early fork ears to trade?

[shinyribs]

I just needed the covers.I dont need the guts. Yeah,you really oughta hold on to that stator! I do want the 4-1 pleeeeeease!

If you want to sell the spigots,that's cool.If you need to keep them,thats cool,too. Whatever you decide is fine with me. I'm in no rush so take your time to decide what you wanna do with them.

No,I dont have any fork ears to trade. Is there anything else you are looking for? I got alot of odds and ends,but nothingmajor. Should held off on the clutch lever for trading leverageJust messing with ya