Project - CB Cafe'-R (1982 CB750 F)

[lucadortenzi]

Hi there guys, it has been a little while.
I have postponed the dynatek, and have been
Working on under seat, and moving electrics around.
I have located the dynatek box under the seat
and will need to run cables on a custome under seat tray
Which also supports the seat. I have also made some customs indicator supports
from unused office furniture components. The best this is a small floorbox I
Used to allocate most of the electrics. I made 2 versions, second one will be the final
Will post the image tomorrow. Enjoy this in the maintime






<nabble_img src="image160.jpg" border="0"/<nabble_img src="image164.jpg" border="0"/>

[lucadortenzi]

And a bit more. Also pretty glad to have ordered my lift! 😃

[lucadortenzi]

Had a vision of the front sprocket carter..made a first version then
an upgraded one..pretty damn happy with the result..what you
guys think?

[Hoko]

Nice!  Looks like my Katana

[lucadortenzi]

While working on the loom wire..




Got a Katana brake caliper, OZ cbr600rr 05 wheels and
Complete front end. Adapted the front stem with a bolt on
one from Cognito Moto. Some parts need to be rectified.
Clip ons and all the remaining needed on the way..

[Hoko]

lucadortenzi wrote

Hi there, does anyone has experience with Davida's swingarm? pretty rare to find, I managed to grab one off ebay the other day. It should fit some of the gsxr caliper support and caliper with a gsxr wheel.
 Got a Katana brake caliper, OZ cbr600rr 05 wheels and Complete front end.

Nice work!  I am assuming those are Gixxer wheels?  I was wondering how you got the Katana caliper to work.

[lucadortenzi]

Hi there. Those are O.Z. Alu wheels dristributed from Braking Italy. Originally taken from a CBR 600RR 2007.
Did not mount the Katana caliper yet, I am getting the axle hole enlarged from 20mm to 25mm to then fit a Honda Hornet axle.
Break pads won't sit perfectly on the disk covering all the braking surface, but enough to give a strong bite.
Now, quick question:

Does anyone know what criteria to use to buy rear and front sprocket (as bike has none now) to be installed on the new rear wheel?

[TOOLS1]

530 chain with 18 tooth front, and 45-48 tooth rear. would be what I would use.
TOOLS