new harness now bike wont run just back fires 76 cb750

[globalfastener]

ok..i settled on just hooking everything up for now and wiring the light to work.

with all the signals plugged in, one signal will light up(i assume all the other bulbs are blown)

when i unhook the hot going into the switch, the signal goes out.  that should mean that there is power coming out of the switch and making its way to the signals right?

[Piute]

  Go to http://www.classiccycles.org/1852/3701.html
  click on second green dot:  k0-k8....f1-f3.....serv.man.1969-1978
     after it loads ;
    go to Body N Electrical   16 then to 16-7
        go from there on your trouble shooting,by knowing what the switch does in each possition.
           so can be tested correctly....
........................Piute N Judose..........good luck..