Parting out 78 CB 750 (Very rare F-K model)

[TOOLS1]

My buddy, and I just picked this up. It is an F model disguised as a K model. He wanted the engine guards. I might want the exhaust, and front fender. Everything else is up, for grabs. The engine is good. Let me know what, you want, and I will give, you a price.

 

 

 

TOOLS

[shinyribs]

DIBS ON THE CUSH DRIVE !!!!  I need it for the Comstars on hack job. I can measure the offset on mine to make sure it will work. If it does,you just made me very happy. If you'd rather not separate the wheel from the cush drive i can either buy the whole wheel or trade you cush drives. Which ever suits you.



Measured mine. My rear sprocket sits to the inside of my front sprocket. The widest part of the rear sprocket is exactly 1 1/2'' off of the part of the wheel that accepts the cush drive. I'm off about 3/8 like we talked about that other time. Thanks

Oh yeah,I need a kick stand and that bolt,too.If you are parting with that piece.

[shinyribs]

Is the chrome good on the clutch cover? If it is I'll take that too,please. I also need motor mounts and all of the motor mounting bolts,especially the long ones.  Do you have an order form I should fill out?



im eyeballing those calipers,too.wondering if they'll bolt on my forks

[globalfastener]

ive got this stuff too, if yall still need it

 

-----Original Message-----
From: shinyribs [via Honda CB750'S] [mailto:[hidden email]]
Sent: Saturday, July 21, 2012 08:47 PM
To: 'globalfastener'
Subject: Re: Parting out 78 CB 750 (Very rare F-K model)

Is the chrome good on the clutch cover? If it is I'll take that too,please.

---

If you reply to this email, your message will be added to the discussion below:

http://honda-cb750-s.456789.n3.nabble.com/Parting-out-78-CB-750-Very-rare-F-K-model-tp4025634p4025640.html

To start a new topic under For Sale/Want to Buy, email [hidden email]
To unsubscribe from For Sale/Want to Buy, click here.
NAML

[Piute]

Does it have a K or F rear fender

[wes]

i need a center stand assembly.

[TOOLS1]

I will try to PM back to every one. If, you don't hear from me, let me know.
TOOLS
P.S. Globel you have your own thread. Go back there , and pedal your over priced parts.

[TOOLS1]

Piute
I believe it is a K fender. I'm not sure what the F fender would look like with out the seat/cowl. Also don't, you need the break pedal/foot peg mount?
TOOLS

[Piute]

TOOLS1 wrote

Piute
I believe it is a K fender. I'm not sure what the F fender would look like with out the seat/cowl. Also don't, you need the break pedal/foot peg mount?
TOOLS

 
 I've got to fill the space under my seat to the hitch and still havn't decided how.
   Have 3 different 750 pedals and 1 more on the way along with pegs,had to mount my hitch on outside of left braket due to no space on inside ( hit swingarm).My friend she just rest them on the hitch bracket bars,Thinking some type of running boards there. THX.

[TOOLS1]

It was the aluminum thing I thought, you needed. The one that was cracked. Anyway I have little running boards that match that break pedal thingy. $20.00 shipped.
TOOLS

[Piute]

   WELL ,So long as my trailer doesn't crack the one I got ("E"bay),RIGHT side ,I should be good there,Havn't pulled A trailer yet ,.
   Thoughs Running boards sound interesting ,send a couple pic's ,sure to see how they mount,They have to be like one's that have clamp like applying to crash bars(7/8s-1")tubeing Ya-No?
                                            ?  IS IT A F2 ENGINE  ?
   Keep all of the engine in tack (covers too)and most likely wont unless I run across A complete with Title,such as this I'm thinking more towards winter/spring for complete when people need $$$$,(work is slow for them).I'll be busy all year around ,IF I keep this J O B  Tnen again could be up in your area with an emtie trailer

[TOOLS1]

I'll get some pictures later today of the running boards. The engine is an F-3. This is the one with higher compression, bigger valves, and hotter cam.
TOOLS

[MarkPBG]

Come on guys, this is obviously an April Fools joke. I mean, seriously, TOOLS buys a bike, even as part owner with one other guy and SELLS it? The man doesn't sell bikes, he builds sheds to hold more!


LOL J/K....good luck with the sales TOOLS, just funnin' with you! ;)

[TOOLS1]

Some must be sacrificed, for the good of the others.
TOOLS

[shinyribs]

Mark...dont start trouble now. I am in need of that cush drive!Hey,did you still want those brake parts? If not,no problem,I might just ebay them or try and trade them off.

[MarkPBG]

This calls for a 21 bike salute for the fallen hero!
 

[1bonehead]

So how much for the motor?  when you say good it is rebuildable? or running?

[TOOLS1]

When I say "good" I mean "GOOD" It's running! I am planning on doing a compression check on though, just to have some numbers. Also I plan on getting a video of it running. Since it is an F-3 it is a little more then a K model. I was going to ask $400.00 plus shipping.
TOOLS

[TOOLS1]

Here is the floor board thingys.

TOOLS

[TOOLS1]

Shiny The caliper mounting holes measure 2 9/16 inch.
TOOLS