Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."
1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
Toolbabe took the Bobber down the road today However she did not go far It does not want to rev. It runs like the break is on. I am thinking it is the ignition advance. I am going to have to get a timing light to check it out (mine is in South Carolina). If it is not that I will have to re-jet the carb, for the pod.
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."
1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
That reminds me,Tools.I have a SOHC question for you.When i was testing my turn signals tonight i turned my engine kill switch off so i wouldnt be drawing on the ignition to conserve the batt.That was my idea,anyway.After about 30-45 minutes later,when i was zip-tying everything up i noticed the right side coil(1-4 i think?)was a little warm to the touch.Should it have done that?
I have never had one coil get hotter then the other. Seems odd She only made it half a block. However the real reason it does not want to rev. Might be the flowers she put on the tank TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."
1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
Do you think that with the electonic ignition it was sitting where it was trying ti fire that on side?But the kill switch was off is what gets me.It was not very hot at all.Maybe 10 degrees warmer than room temp
That could be it. Does the electronic ignition have a switched hot to it? Have, you checked the kill switch, for continuity?
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."
1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
I know that it worked perfectly,just like the factory intended,before it tore it down.Everything should be just like it was.I havent tried to crank it and check for spark yet.No oil in the motor.
I did remember to put oil in the engine, Still looking, for time.
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."
1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
She put flowers on the gas tank I tried stuffing the pod with foam, but it did not help. I am going to have to drill the jets. Not looking forward to it, but at least it is only one carb. Right now I have the TLR 200 on the lift. Putting a new chain, and 10 tooth front sprocket on it. I am also removing the turn signals, and am going to make the foot pegs a little larger.
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."
1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
It came from Cycle-X. It does not take much fabrication to install. It is one of the easiest mods to do.
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."
1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
It came from Cycle-X. It does not take much fabrication to install. It is one of the easiest mods to do.
TOOLS
I would imagin it wouldn't.
Now that I have been taking welding classes & buying a few different welders & a plasma cutter (don't tell the wife lol) I have found that fabricating is a cinch!
I also like the taillight, good replacement for the big bulky CB unit!!!
Plasma Cutter! Your going big time. Probably wont want to have anything to do with me before long. I still use a cutting torch. I got the taillight off e-gay. I think it was around $30.00. Was really surprised with how good the quality was, and it covered the holes from the stock light.
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."
1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)
Oh man you can't beat a plasma cutter. Hell a cheepy Harbor freight unit goes for around $600 bucks (shhhh aw jeeze I think I typed too loud, the wife may hear)
No pre heating needed, it uses your compressor for nitrogen, cut a clean straight lines with ease upto 1/2 inch thick.
I went, and tried to fire it up, but it would not go. I checked spark, and there was none. I pulled the point cover off, and the points looked like acid had been poured on them. Looked like two dried up warts rubbing together. I have never seen anything like it. Last year before starting this project. I installed the points, and condenser new. I started the bike, and it ran, for maybe 5 minutes. I then shut it off, and disassembled it. What could have done this? At $16.00 a set I hope this was a one time thing.
TOOLS
sounds like you left the power on. That would fry the points.
TOOLS1 wrote
I went, and tried to fire it up, but it would not go. I checked spark, and there was none. I pulled the point cover off, and the points looked like acid had been poured on them. Looked like two dried up warts rubbing together. I have never seen anything like it. Last year before starting this project. I installed the points, and condenser new. I started the bike, and it ran, for maybe 5 minutes. I then shut it off, and disassembled it. What could have done this? At $16.00 a set I hope this was a one time thing.
TOOLS
American by birth. Cowboy by choice!
Vero Beach, FL
http://i373.photobucket.com/albums/oo172/grandpaslinger/HD%20Road%20Glide/IMAG0046.jpg
<quote author="Cabreco"> Oh man you can't beat a plasma cutter. Hell a cheepy Harbor freight unit goes for around $600 bucks (shhhh aw jeeze I think I typed too loud, the wife may hear)
No pre heating needed, it uses your compressor for nitrogen, cut a clean straight lines with ease upto 1/2 inch thick.
Check it out!
American by birth. Cowboy by choice!
Vero Beach, FL
http://i373.photobucket.com/albums/oo172/grandpaslinger/HD%20Road%20Glide/IMAG0046.jpg
Locked
do i even want to know...???
However she did not go far
It does not want to rev. It runs like the break is on. I am thinking it is the ignition advance. I am going to have to get a timing light to check it out (mine is in South Carolina). If it is not that I will have to re-jet the carb, for the pod.
I tried stuffing the pod with foam, but it did not help. I am going to have to drill the jets. Not looking forward to it, but at least it is only one carb. Right now I have the TLR 200 on the lift. Putting a new chain, and 10 tooth front sprocket on it. I am also removing the turn signals, and am going to make the foot pegs a little larger.
