need some help here in hemet ca

[drunkpunk]

hi ok just got done gettin this whore back together whitch wasnt easy on the broke dick budget any way the carbs need to be synced bad i have a mercery sync tool but dont have the 8mm nipples that screw into carbs and the dwell meter i have only set up for 6cyl and 8cyl cars so im haveing a lil truble with the points and timming too if any one lives in or near hemet ca and wouldnt mind helpin me out i would be very greatful im almost always home now that work has slowed way way way down
thank you  Vince
[e-mail]

[Polymer-2]

Don't know which model you have but mine uses 5mm nipples.
You can get some HERE.

[Re-run]

You should be able to convert the readings on your dwell but regardless the dwell is not required. Just set the points to the closes gap for your bike and make sure static timing is set right. You can use a timing light to dy advanced timing if you want but it is not required.

[drunkpunk]

thanks