piute 1977 CB 750 F2 SADDLE BAGS / FAIRING/TRAILER HITCH (touring)

[Piute]

       It a Gal. ,
     One bagg (L)carries all tools on bottom,then heavy gloves/coconut is all,(space left for groceries).When riding the helmet & gloves are on,I've had them stolen left laying on bike in Dallas.   (R) rain gear,mo Gloves,.
    The reason for tour-pak is to carry helmet and coat,quik to get to stuff,papers(X-maps)/lunch/Gun/ammo,and not dig to find,I carry way to much ,tools/gear/heck I even carrie a sward ,never with-out my Bible.I never plan on racing (needing faster start)I strongly believe the extra weight helps these cheapo tires with traction & wear.(rain & wind)

[Piute]

                                Cut the pan And will Glass



STK.CUT n GRINDED



















NOW BENT TO BE FLATTER

[Piute]

        NEED COPY HERE ;                          
                                   Take a look what I've got going
                                     Originals seat with cover off

                                     Cut down to pan width

                 well I will have the seat off set for my support,rear will have trunk or sissy bar

                            Bad pic.(better when outside morn)
                    There will be 2 separt seats,SOLO

                      Looking from backside even with pan(also better for short leg)

                      Sure wings were pulled in N forward before cut

[shinyribs]

I like where this is headed...

[Piute]

    Hey Chrome guy,
     Some time(I hope) February I'll get started on that custom oil bag,
      As shown dropping seat (pic about 1 1/4,I'm thinking approx.2 inches)

                                    "SEE REASON FOR 2 peace SEAT"
     lower mounts will need relocated I'm sure,
    (pic looks like max with-out fabing bag to much)
     top hole filled and new drilled,OF course some special coating from yo Bud.
   Then also  snag Honda's Bitch-bar sliding idea too(but 1/2"solid steal) /adjusting
     intergraded into saddle bag plate/mount,Then yo buds plating,
              Trying to get done before it gets into riding time,
               BUT theres lots of rainy wkends in Feb. & March.

              May need Moving time think I found a place for Judose & I,

                    No more dog house fo him,doggy door's ROCK

[Piute]

    Didn't warm up enough to mold seat pans,Dang i need my place I'd do it in bath-room,

    Pan set level,front foam needs cut at blk.line rear needs fill in air gap area,
           off for some gap filler,caned insul.

[Piute]

                   I made a spoiler for my receiver,took off ball drilled a few holes ,

                         nut n bolts,will come in handy (holding my Honda bagg)

[sgtslag]

Very sharp, very professional.  Thanks for sharing.  Cheers!

[Piute]

      THX.Srg.,
  My thought, was better then up high on seat/rack or even in tour pack ,
  Will work till I finish my other idea's
     (lowering tour-pac to seat height)

[Piute]

                        O.K. Have this right now will be ready once completely moved
Found prob Tanks Shultz my fender is straight on top why couldn't get right look


  Will work Great for tour-pak(not Chromed that insulation had a custom leather cover)

[Piute]

         Been trying to use the Honda trunk but to dang big
 

         Save my custom jacket cover for later,This lil trunk to match custom paintplenty of room to remover saddle bagg covers

[Piute]

           Took the running boards off today,
       was going to hardware store took my Lil short-cut cross field
       and thru a lil park "road" was packed ICE
       Hit my leg on boards and still filling it,No prob

[shinyribs]

OuchDon't do that anymore!

Your bike goes thru more changes than mine!It's hard to leave them alone,isn't it?

[Piute]

                    THATS all part of the fun, warming up change of color
                                   
                Need A rear set and forward controls both on at same time ,
                                           
                                  JUST IN CASE
                                         

[shinyribs]

I hear ya on two sets of controls. I dont care how comfy any bike is,sitting in one position can only be comfy for so long. Sometimes I hang my feet on the swingarm,sometimes I prop up on the stator cover with my left foot. On the chop I used to stretch my legs out on top of the valve cover

[Piute]

       BIGG front crash bars are nice plenty of places,they come so you can mount pegs,
                      I did my thing with brass spacer(inside the bar)

[Piute]

[shultz_1978]

Happy Easter Buddy.

[shinyribs]

Ah,I had forgot all about the using brass trick.

[Piute]

             I've got brass washer N scews here n there,Add as I go.