New build coming...Rover

[Lucky 1]

Will do but first I need to make the clamps to hold them on.
Cycle-X gives you some very nice chrome clamps, but then you have to fab something to hold them on the bike.
For me it will have to be a bolt on solution. I do not want to weld on my powder coated frame.

[Lucky 1]

Shot of gas tank with gas proof clear coat.

[Lucky 1]

Photo of exhaust clamp connection.
I made two of these brackets.

[Hellbilly429]

Wow, that clear coat turns out awesome, looks flawless

Can't wait to see a full pic of those pipes

[Lucky 1]

I was just working on that.

[Hellbilly429]

Sweet! Didn't mean to jump the gun Lucky

[Lucky 1]

It's OK ...I work better under the gun anyway.
More photos later.

[shinyribs]

Ah yes! Those pipes are right on perfect!!!!!

[Lucky 1]

Thanks Shinyribs!

I painted the beautiful chrome brackets black
 because the brackets were just getting too much attention
next to the black exhaust tubes.
Today I will be mounting the rear fender and doing more electrical.

[Lucky 1]

Rear fender mounting.

[shinyribs]

That bracket hugs the fender nicely! Good work Lucky

[Lucky 1]

Thanks Shinyribs!
Tomorrow is more wiring and headlight issues.
Carb installation.

[Lucky 1]

Believe it or not that fender brace is hollow tubing!

[alehman]

looks great!

[Lucky 1]

Thanks Alehman!

[Lucky 1]

Headlight mounting.

[Lucky 1]

Sneak Peek with gas tank just sittin on the frame.

Of course it is not sitting on the ground so it will be lower.
I think I will lower that head light a bit also.

[Piute]

     Looking GGGGGreat there Unlucky ,That color is gGGGreat ,Orange is 1 of my fav's.

[Lucky 1]

Thanks Plute!
I am working on making some handlebars.
I bought some riser extenders but I had to put them on upside down
because the handle bars were hitting the gas tank.

The the handlebars were high enough but I could not reach them.LOL

So I realized I needed to make them myself so they would be right.

Photos coming.

[Piute]

     I was bidding on some relocating clamps ,they moved (ABOUT THE SIZE OF reg.CLAMP width forward or back depending on witch way you put it on .
    went back to look N pic. something went wrong are relisted
http://www.ebay.com/itm/CB750-SOHC-Handlebar-Relocation-Kit-1969-1978-Sandcast-K0-K8-CB-750-CB750K-F-/110973334634?_trksid=p2047675.l2557&ssPageName=STRK:MEWAX:IT&nma=true&si=qqgYZ%2Bte8V67rouMcbD63uJlU38%3D&orig_cvip=true&rt=nc

   couple pics  may be what you wont 20 bucks ,


                          Cost ya 1/2 that for nuts n bolts