Piute putt 1977 CB 750 F2

[TOOLS1]

Just use an 1/8 inch drill bit as a measuring device to sync the carbs. Just adjust all the sliders to 1/8 inch.
TOOLS

[shinyribs]

I dig the black carbs!Looks stealthy and classy at the same time.Very nice

[Piute]

Just use an 1/8 inch drill bit as a measuring device to sync the carbs. Just adjust all the sliders to 1/8 inch.
TOOLS 1/2 indch give me more gas?

[TOOLS1]

1/2 inch works to, but, you will have a lot of screw-in to do with the idle adjuster.
TOOLS
P.S. You do know to do No#2 first, right?

[Piute]

1/2 inch works to, but, you will have a lot of screw-in to do with the idle adjuster.
TOOLS
P.S. You do know to do No#2 first, right ?

 #2 has no adjusting,I plan to just match it at a twinkle of light as it sets now,the way I put it in, >>>Piute<<<

[TOOLS1]

You adjust the No#2 with the idle adjuster to 1/8 inch. Then adjust the rest to 1/8 inch. A lot closer then a flash light. You use the drill bit as a feeler gauge.
TOOLS

[Piute]

 Piute Putt Latest pic 9-15-11   9pm   one thing good about painting small things they can change overnightflame going flt.blk.

[Daddyman]

Lookin real good there Piute

[shinyribs]

Now that looks good!  I like how the flames twist,very cool!  You did a good job,Piute!  Looking at your pic makes me think i screwed up...my caliper is on the front side of the forks

[shinyribs]

Nevermind,looked at Daddyman's bike...i got it right 

Anyway,i love your tank!That thing looks great.It looks nice...but kinda mean at the same time

[Daddyman]

You put it on the wrong side then haha  Piute has dual disk too

[shinyribs]

I thought i had my forks backwards for a minute! Yours is off the front Daddy-o,thats all i care about.I think Piutes is wrong !!!!

[Daddyman]

Wonder if Ill have to move em to the back when I do dual disk?

[shinyribs]

I dunno,that is odd to me.I thought they all went off the front.Im going pic huntin now

[shinyribs]

I got your pics you wanted,Piute.Sorry it took so long

[Piute]

>Now that looks good!  I like how the flames twist,very cool!  You did a good job,Piute!  Looking at your pic makes me think i screwed up...my caliper is on the front side of the forks
.............................................................................................................................................
  I was looking at an ole Hot-Rod mag.and decided what the heck ,flame on
  your fork leg on the wrong side ,(hill-billys ?)
  thats the way it is

[shinyribs]

If mine is wrong then so is Tools' buddyCaliper to the front

[rich]

Great paint job. Can I send you my tank for a winter project? I mean now that you are done with yours you will have a lot of time on your hands and you know what they say about idle hands. Just kidding but your flames do look really cool!

[shinyribs]

Daddyman wrote

Wonder if Ill have to move em to the back when I do dual disk?

Nope!Your good

[Piute]

 Thanks Daddyman,
.........."Wonder if Ill have to move em to the back when I do dual disk".......................
 
There so much bull about dual disc out there ,It's all good but each make it seem so complicated,book says all kinds of stuff about mine that don't even make sense,cup under the front excel should have a "f" on it and goes towards the front,(no "f" there).
   
Learning and knowing all the little tricks and tips is how to win this game.
 
 Now inline filter and fire this baby up again ,used a allen wrench to temporally sync the carbs(was the lowest I could get)Thanks for tip TOOLS
   Think I can finaley get into the rear
                                             
                                       >>>Piute<<<N<<<Judose<nabble_img src="green_2.jpg" border="0" class="center"/>